Plug-ins Change the quality of the sound.
Plug-ins Change the quality of the sound.
Don’t forget that any pro audio editor is not using all this stuff all the time, and may only use a few of them regularly; those plugins that give the best results for the type of audio they’re working on, Don’t get too deep into them or you’ll never get off the ground
Auto Duck: Reduces (ducks) the volume of one or more tracks whenever the volume of a specified "control" track reaches a particular level. Typically used to make a music track softer whenever speech in a commentary track is heard.
Compressor: Compresses the dynamic range by two alternative methods. The default "RMS" method makes the louder parts softer, but leaves the quieter audio alone. The alternative "peaks" method makes the entire audio louder, but amplifies the louder parts less than the quieter parts. Mal ppl ke-up gain can be applied to either method, making the result as loud as possible without clipping, but not changing the dynamic range further.
Limiter: Limiter passes signals below a specified input level unaffected or gently reduced, while preventing the peaks of stronger signals from exceeding this threshold. Mastering engineers often use this type of dynamic range compression combined with make-up gain to increase the perceived loudness of an audio recording during the audio mastering process.
Normalize: Use the Normalize effect to set the maximum amplitude of a track, equalize the amplitudes of the left and right channels of a stereo track and optionally remove any DC offset from the track.
SC4: This effect is a stereo compressor with a variable envelope follower for
Fade a section in or fade it out
Crossfade Clips: Use Crossfade Clips to apply a simple crossfade to a selected pair of clips in a single audio track.
Crossfade Tracks: Use Crossfade Tracks to make a smooth transition between two overlapping tracks one above the other. Place the track to be faded out above the track to be faded in then select the overlapping region in both tracks and apply the effect.
Fade In: Applies a linear fade-in to the selected audio - the rapidity of the fade-in depends entirely on the length of the selection it is applied to. For a more customizable logarithmic fade, use the Envelope Tool on the Tools Toolbar.
Fade Out: Applies a linear fade-out to the selected audio - the rapidity of the fade-out depends entirely on the length of the selection it is applied to. For a more customizable logarithmic fade, use the Envelope Tool on the Tools Toolbar.
Studio Fade Out: Applies a more musical fade out to the selected audio, giving a more pleasing sounding result.
Adjustable Fade: enables you to control the shape of the fade (non-linear fading) to be applied by adjusting various parameters; allows partial (that is not from or to zero) fades up or down.
For a discussion of what the different typesfade do, see Fade
Bass Bass and Treble: Increases or decreases the lower frequencies and higher frequencies of your audio independently; behaves just like the bass and treble controls on a stereo system.
Classic Filters: Offers three different types of filter which together emulate the vast majority of analog filters, providing a useful graphical tool for analysis and measurement. This effect is not enabled by default. To enable it, use Effect > Add / Remove Plug-ins... to open the Plug-in Manager: Effects, Generators and Analyzers dialog.Distortion: Use the Distortion effect to make the audio sound distorted. By distorting the waveform the frequency content is changed, which will often make the sound "crunchy" or "abrasive". Technically this effect is a waveshaper. The result of waveshaping is equivalent to applying non-linear amplification to the audio waveform. Preset shaping functions are provided, each of which produces a different type of distortion.
Equalization: Adjusts the volume levels of particular frequencies.
High Pass Filter: Passes frequencies above its cutoff frequency and attenuates frequencies below its cutoff frequency.
Low Pass Filter: Passes frequencies belowg its cutoff frequency and attenuates frequencies above its cutoff frequency.
Paulstretch: Use Paulstretch only for an extreme time-stretch or "stasis" effect, This may be useful for synthesizer pad sounds, identifying performance glitches or just creating interesting aural textures. Use Change Tempo or Sliding Time Scale rather than Paulstretch for tasks like slowing down a song to a "practice" tempo.
Phaser: The name "Phaser" comes from "Phase Shifter", because it works by combining phase-shifted signals with the original signal. The movement of the phase-shifted signals is controlled using a Low Frequency Oscillator (LFO).
Spectral edit parametric EQ: When the selected track is in spectrogram or spectrogram log(f) view and the spectral selection has a center frequency and an upper and lower boundary, performs the specified band cut or band boost. This can be used as an alternative to Equalization or may also be useful to repair damaged audio by reducing frequency spikes or boosting other frequencies to mask spikes.
Spectral edit shelves: When the selected track is in spectrogram or spectrogram log(f) view, applies either a low- or high-frequency shelving filter or both filters, according to the spectral selection made. This can be used as an alternative to Equalization or may also be useful to repair damaged audio by reducing frequency spikes or boosting other frequencies to mask spikes.
Tremolo: Modulates the volume of the selection at the depth and rate selected in the dialog. The same as the tremolo effect familiar to guitar and keyboard players.
Vocoder: Synthesizes audio (usually a voice) in the left channel of a stereo track with a carrier wave (typically white noise) in the right channel to produce a modified version of the left channel. Vocoding a normal voice with white noise will produce a robot-like voice for special effects.
Wahwah: Rapid tone quality variations, like that guitar sound so popular in the 1970's.
Repair damaged audio
Click Removal: Click Removal is designed to remove clicks on audio tracks and is especially suited to declicking recordings made from vinyl records.
Clip Fix: Clip Fix attempts to reconstruct clipped regions by interpolating the lost signal.
Noise Reduction: This effect is ideal for reducing constant background noise such as fans, tape noise, or hums. It will not work very well for removing talking or music in the background. More details here.
Notch Filter: Greatly attenuate ("notch out") a narrow frequency band. This is a good way to remove mains hum or a whistle confined to a specific frequency with minimal damage to the remainder of the audio.
Repair: Fix one particular short click, pop or other glitch no more than 128 samples long.
Spectral edit multi tool: When the selected track is in spectrogram or spectrogram log(f) view, applies a notch filter, high pass filter or low pass filter according to the spectral selection made. This effect can also be used to change the audio quality as an alternative to using Equalization.
Make the sound faster, slower, lower pitched or higher pitched
Change Pitch: Change the pitch of a selection without changing its tempo.
Change Speed: Change the speed of a selection, also changing its pitch.
Change Tempo: Change the tempo and length (duration) of a selection without changing its pitch.
Sliding Time Scale / Pitch Shift: This effect allows you to make a continuous change to the tempo and/or pitch of a selection by choosing initial and/or final change values.
Paulstretch: Use Paulstretch only for an extreme time-stretch or "stasis" effect, This may be useful for synthesizer pad sounds, identifying performance glitches or just creating interesting aural textures. Use Change Tempo or Sliding Time Scale rather than Paulstretch for tasks like slowing down a song to a "practice" tempo.
Truncate Silence: Automatically try to find and eliminate audible silences. Don't use with faded audio.
Add reverberation or echo
Delay: A configurable delay effect with variable delay time and pitch shifting of the delays.
Echo: Repeats the selected audio again and again, normally softer each time and normally not blended into the original sound until some time after it starts. The delay time between each repeat is fixed, with no pause in between each repeat. For a more configurable echo effect with a variable delay time and pitch-changed echoes, see Delay.
Reverb: A configurable stereo reverberation effect with built-in and user-added presets. It can be used to add ambience (an impression of the space in which a sound occurs) to a mono sound. Also use it to increase reverberation in stereo audio that sounds too "dry" or "close".
For details of the underlying principles of delay and reverb effects please see this page in the Wiki.
Remove vocals
Invert: This effect flips the audio samples upside-down. This normally does not affect the sound of the audio at all. It is occasionally useful for vocal removal.
Vocal Reduction and Isolation: Attempts to remove or isolate center-panned audio from a stereo track. Most "Remove" options in this effect preserve the stereo image.
Vocal Remover: (Legacy effect) Attempts to remove center-panned vocals from a stereo track. The output from this effect will always be mono. Help text is available from within the dialog.
Manipulate Audio
Repeat: Repeats the selection the specified number of times.
Reverse: Reverses the selected audio; after the effect the end of the audio will be heard first and the beginning last.
Invoke Nyquist
Nyquist Prompt: Brings up a dialog where you can enter Nyquist commands. Nyquist is a programming language for generating, processing and analyzing audio. For more information see Nyquist Plug-ins ReferencGenerators by Function
See the Generate Menu for further details.
Generate Tones
Chirp: Generates four different types of tone waveform like the Tone Generator, but additionally allows setting of the starting and ending amplitude and frequency.
DTMF Tones: Generates dual-tone multi-frequency (DTMF) tones like those produced by the keypad on telephones.
Tone: Generates one of four different tone waveforms: Sine, Square, Sawtooth or Square (no alias), and a frequency between 1 Hz and half the current project rate.
Generate Silence or Noise
Noise: Generates 'white', 'pink' or 'brown' noise.
Silence: Creates audio of zero amplitude, the only configurable setting being duration.
Generate Instruments or Metronome
Rhythm Track: Generates a track with regularly spaced sounds at a specified tempo and number of beats per measure (bar).
Pluck: A synthesized pluck tone with abrupt or gradual fade-out, and selectable pitch corresponding to a MIDI note.
Risset Drum: Produces a realistic drum sound.
Generate from Imported Data
Sample Data Import: Create audio from imported numeric data.
Analyzers by Function
See the Analyze Menu for further details.
Analyze Amplitude or Other Audio Properties
Contrast: Analyzes a single mono or stereo speech track to determine the average RMS difference in volume (contrast) between foreground speech and background music, audience noise or similar. The purpose is to determine if the speech will be intelligible to the hard of hearing.
Find Clipping: Displays runs of clipped samples in a Label Track, as a screen-reader accessible alternative to View > Show Clipping. A run must include at least one clipped sample, but may include unclipped samples too.
Plot Spectrum: Takes the selected audio (which is a set of sound pressure values at points in time) and converts it to a graph of frequencies against amplitudes.
Sample Data Export: Reads the values of successive samples from the selected audio and prints this data to a plain text, CSV or HTML file. Further information may be added as a "header" at the top of the file.
Divide Up Sounds or Silences using Labels
Regular Interval Labels: Places labels in a long track so as to divide it into smaller, equally sized segments.
Silence Finder: Divides up a track by placing point labels inside areas of silence.
Sound Finder: Divides up a track by placing region labels for areas of sound that are separated by silence.
Mark Beats using Labels
Beat Finder: Attempts to place labels at beats which are much louder than the surrounding audio. It's a fairly rough and ready tool, and will not necessarily work well on a typical modern pop music track with compressed dynamic range. If you do not get enough beats detected, try reducing the "Threshold Percentage" setting.
VST DOWNLOADABLE PLUGINS
List of Plug-ins with download links
ADopplerEn.dll
Antares AutoTune Evo - Mostly works with current Audacity. Automatic pitch correction works, but to be able to draw pitch curves clock must be set to "internal" and not "host". (commercial)
Antress Modern Plug-ins including a number of compressors, a limiter, an expander, an exciter and a "spacer" which could be used for creating "fake stereo"
ANWIDA Soft DX Reverb Light.dll for Windows and Mac (PowerPC only)
Bo Johansen Plug-ins
BJ Flanger.dll
BJ LoFi.dll
BJ Overdrive.dll
BJ Ringmodulator.dll
BJ Tremolo.dll
BJ Wavechanger2.dll
Bluecat Plug-ins
BlueCatMonoChorusVST.dll
BlueCatFlangerVST(Mono).dll
BlueCatFlangerVST(Stereo).dll
BlueCatPhaserVST(Mono).dll
BlueCatPhaserVST(Stereo).dll
BlueCatStereoChorusVST.dll
bs2b.dll stereo to binaural
Buzzroom CL 201 (Vintage Maximiser) - now shareware
Classic plug-ins
Classic Auto-Filter.dll
Classic Chorus.dll
Classic Compressor.dll
Classic Delay.dll
Classic EQ.dll
Classic Flanger.dll
Classic Master Limiter.dll
Classic Phaser.dll
Classic Reverb.dll
digitalfishphones plug-ins
dominion v1.2.dll - a tool to shape the envelope of a signal, giving you total control of the signal's attack & sustain phase
endorphin - dual-band stereo compressor
Fish fillets package
BLOCKFISH - compressor for Windows and OS X (PPC only)
FLOORFISH.dll - expander/noise gate for Windows and OS X (PPC only)
SPITFISH.dll - de-esser for Windows and OS X (PPC only)
normalizer.dll - a denormalization tool
THD.dll - analog-style saturator
DtBlkFx (FFT-based frequency and harmonics manipulation). Also supports OS X (Universal binary) but only Windows version tested.
Extra Boy Pro removal and isolation of audio components (commercial, paid for)
EZmix (commercial, time limited demo available). Also supports OS X but only Windows version tested.
Freeverb Plug-ins
Freeverb for OS X
Freeverb2.dll for Windows
FreeverbToo.dll for Windows
GMulti Multi-band compressor
iZotope vinyl for Windows and OS X
JS plug-in pack - contains plug-ins listed below.
JS 6 equalizer V1.0.dll
JS Band Cut V1.0.dll
JS Compresseur V1.1.dll
JS Disto V1.0.dll
JS equalizer V1.0.dll
Humanizer v1.0.dll
JS Limiteur V1.0.dll
JS Magneto V1.1.dll
JS Mini-sample V1.0.dll
JS Noise Attenu V1.0 .dll
JS Noise Filtre V1.0.dll
JS Oscil resonne V2.0 .dll
JS Oscil resonne V3.0.dll
JS PanDelay .dll
JS Resonnateur V1.0.dll
JS Vibrato V1.0.dll
jVSTwRapper-based plug-ins (on Windows, Mac OSX PPC/Intel and Linux).
jVSTwRapper is a way of writing Java plug-ins using VST-based technology, enclosed in a wrapper that makes them compatible for use in VST, Audio Unitsand LADSPA hosts. Thus jVSTwRapper plug-ins can be run on all three platforms.
Killeringer.dll
Lisp level-independent sibilance processor
Smartelectronix Plug-ins
Ambience - reverb plug-in for Windows, OS 9/X (PPC only)
mda Bandisto.dll
mda BeatBox.dll
Bouncy.dll
mda Combo.dll
mda De-ess.dll
mda Degrade.dll
mda Delay.dll
mda Detune.dll
mda Dither.dll
mda DubDelay.dll
mda Dynamics.dll
mda Envelope.dll
mda Image.dll
mda Leslie.dll
mda Limiter.dll
mda Loudness.dll
MjCompressor.dll for Windows and OS X Windows version only has a tabular interface even in Audacity 1.3.8+
mda MultiBand.dll
mda Overdrive.dll
mda RePsycho!.dll
mda RezFilter.dll
mda RingMod.dll
mda RoundPan.dll
mda Shepard.dll
mda Splitter.dll
mda Stereo.dll
mda SubSynth.dll
mda Talkbox.dll
mda ThruZero.dll
mda Tracker.dll
mda VocInput.dll
mda Vocoder.dll
NorthPole.dll
REFLEX free - a regenerating delay plug-in, a mixture of stereo delays followed by a dense
Robotizer for Windows and Mac OS X (PPC only)
RoomMachine844.dll
RubyTube.dll
TAL-Reverb-2 - popular GPL licensed plate reverb
TapeIt.dll
TB Compressor (working demo) in Tone Boosters plug-in bundle - supports "New York" or "parallel" compression
UpStereo.dll - stereo widener
UpStereo for OS X (not tested)
VdPhazor.dll
VOX_DoctorDemo.dll - De-Esser
VRingMod.dll
VSpectShift.dll
xChorus.dll
xfaser_lite.dll
List of Plug-ins for which we have no download links
2WarpDelay_v1.dll
4poleLPF.dll
Neosweep.dll
Acidfanatic overdrive.dll
Acidfanatic stereo2mono.dll
Acidfanatic ultradrive.dll
AnalogDelay.dll
AnechoicRoomSimulator.dll
ariesverb_0_2.dll
B_Decoder.dll
bandspin.dll
BassChorusV23.dll
BassPhaserV10.dll
Big Tick Dual Delay.dll
Big Tick Hexaline.dll
BPan_e.dll
BPan_e_gui.dll
BPan_m.dll
BPan_m_gui.dll
c3multibandcomp_1_2.dll
c3multibandcomp_1_2sse.dll
CamelPhatFree.dll
CatDelay.dll
CatDelay_1_3.dll
CCTDelayLE.dll
Chimecho.dll
CompactDistortion.dll
Compressor2.dll
Compressor.dll
CoyoteWah.dll
CrazyIvan.dll
D_Limiter.dll
dB Compressor.dll
dbFree.dll
DCOffsetKiller.dll
Delayer.dll
Delta Filter.dll
Delta Force.dll
Delta Phase.dll
Delta Ping.dll
Delta Space.dll
dfx Buffer Override mono.dll
dfx Buffer Override stereo.dll
dfx Monomaker.dll
dfx Scrubby.dll
dfx Skidder.dll
DFX Transverb.dll
Distortionator Mk2.dll
Dr_ExpanderDemo.dll
echographz.dll
effex.dll
E-Phonic LOFI.dll
E-Phonic XPressor.dll
F_M_Comp.dll
F_M_EQShelf.dll
F_M_Tube.dll
F_S_Comp.dll
F_S_EQFilter.dll
F_S_EQShelf.dll
F_S_LineT.dll
F_S_Phase.dll
F_S_Tube.dll
FEILEI Surround Echo.dll
FEILEI Surround Encode.dll
FEILEI Surround Pan.dll
Filterizer.dll
FilterONE.dll
firegain.dll
Flaser.dll
Flipper.dll
FloFi.dll
florus.dll
FlybabyBETA.dll
Fruity 7band EQ.dll
Fruity balance.dll
Fruity bass boost.dll
Fruity blood overdrive.dll
Fruity filter.dll
Fruity delay.dll
Frohmage_vst2win.dll
Fuzz-Stone.dll
Gain.dll
GClip.dll
GComp.dll
GeneComp3.dll
GeneComp3_mono.dll
GeneComp.dll
GeneComp_mono.dll
GGate.dll
GHi.dll
Glacier.dll
dBlue Glitch - requires Audacity 1.3.9 or later; random probability feature does not work in Audacity 2.0.2
GLow.dll
GranComp3.dll
GranComp3_mono.dll
GranComp.dll
GranComp_mono.dll
GRevDly.dll
GVerb.dll
Hard Limiter.dll
IndyGoDelay.dll
IndyGoGater.dll
IndyGoTremolo.dll
Invada EQ-Tube-Mono.dll
Invada EQ-Tube-Stereo.dll
Invada Tube-Mono.dll
Invada Tube-Stereo.dll
karlette.dll
KarmaFX Deelay.dll
KarmaFX Filter.dll
KewlCompressor.dll
KONTRAST.DLL
KristalEQ.dll
Kristalizer.dll
KristalReverb.dll
KTAudioHealer.dll
KwikKomp2b1.dll
KwikKomp3VST.dll
Levels.dll
LoFiPlus.dll
LPGEQ2.dll
LPGEQ2_1.dll
LPGEQ.dll
LPGEQ_mono.dll
Mab.dll
MadShifta.dll
mdspFlanger.dll
Megatrancer.dll
MjRotoDelay.dll
MnComp_v1r.dll
MonstaChorus.dll
Morphing Delay 2.1 Demo.dll
msBalance.dll
msComp.dll
msDecode.dll
msDelay.dll
msEncode.dll
msSwap.dll
msvcr71.dll
ndcPanner.dll
ndcTrem.dll
ndcTrem_plus.dll
noisegate.dll
Null-BandSpin.dll
P1-Tapedelay.dll
PalancarWare Brick.dll
PalancarWare DeDC.dll
PalancarWare Empire.dll
PalancarWare Ozone.dll
PalancarWare Refero.dll
PalancarWare Scalar.dll
ppdisto.dll
preamp.dll
pvaccu.dll
pvexag.dll
pvtransp.dll
pwmdrive.dll
pzx.dll
q_delOizer30.dll
Qamp.dll
respass.dll
RetroDelay.dll
Reverb.dll
Reversinator.dll RMD.dll
Saturator.dll - analog tape saturation emulator for added "warmth"
sc4.dll
sc 04 sec Stereo Delay.dll
sc Multi Delay.dll
sc Multi Tap Delay.dll
sc Stereo Panner.dll
sc Tremelo.dll
SDynamics.dll
SFilter.dll
SH-1 Chorus.dll
SH-1 Filter.dll
SH-1 Graphic EQ.dll
SH-1 LFO Multi.dll
SH-1 PhaseSifter.dll
SH-1 Reverb.dll
ShivaShifta.dll
SideChCompMn.dll
SideChCompSt.dll
SideKick2.dll
Silverspike Reverb-it Demo.dll
SimpleQ.dll
SimpleTremolo.dll
SLFO.dll
Solidverb.dll
SonicChorus.dll
SpectriX.dll
SPICE1_01.dll
Square-o-matic.dll
Stardust.dll
Starplugs-RuntimePanner.dll
StComp_v1r.dll
stepper.dll
Stereoizer.dll
StereoFaker.dll
StereoStretcher.dll
StereoTools.dll
StudioVerb.dll
SupaPhaser.dll
surrounder.dll
TapeDelay.dll
Telephone.dll - simple, very realistic telephone audio simulator.
TK-3BandDisto.dll
TK-4Filters.dll
TK-BPMDelay.dll
TK-BPMDelayS.dll
TK-FeedFlanger.dll
TK-FilterDisto.dll
TK-FlangDestructor.dll
TK-LPFilterMod.dll
TK-StereoFlanger.dll
TranceFormer.dll
tridirt.dll
T-SLEDGE.dll
TubeBaby.dll
unmatched.dll
VariDelay.dll
VFlange.dll
VFlanger.dll
VIBRATOR1_00.dll
Vibro.dll
Volcano.dll
VoxengoEssEQ.dll
VoxengoLampthruster (a VST amp simulator)
VoxengoOldSkoolVerb.dll
VoxengoPowershaper.dll
VoxengoSampleDelay.dll
VoxengoStereoTouch.dll
VoxengoTempoDelay.dll
VoxengoTubeAmp1.dll
VoxengoTubeAmp.dll
VPingPong.dll
WARP.DLL
Whix.dll
Z-BandSpin.dll
Z-FilterDub.dll
Z-Florus.dll
Z-Ringer.dll
Z-SpShift.dll
These plug-ins usually appear towards the bottom of the Generate menu in Audacity.
Tone Generators
Buzz tone generator
DTMF Tones (random)
DTMF Tones
PWM
Noise Generators
Harmonic Noise
Special Effects
Binaural Tones with Surf 2
Surf-lfo
Surf-oxy
Instruments
Fire and Explosion sounds
KLSTRBAS
Pluck (Hz)
Risset Bell
Sequence Generators
Rndtone
SQ1 Generator Sequencer
Generator Utilities
Nyquist Generate Prompt
Tuning Fork
Variable Duration Silence Generator
Effect plug-in downloads
These plug-ins usually appear towards the bottom of the Effect menu in Audacity.
Amplify, Mix and Pan Effects
Amplify Left or Right Channel
Bass to Center
Center Pan Remover
Channel Mixer
Cross Fade In
Cross Fade Out
Fade In and Out
Panning
Panning (LFO)
Panning (random)
Pseudo-Stereo
Ramp Panning
Repair Channel
Stereo Butterfly (static)
Stereo Butterfly (LFO)
Stereo Butterfly (ramp)
Stereo Widener
Delay and Reverb
Bouncing Ball Delay
Bouncing Ball Delay with Panning
Bouncing Ball Delay with Tone Shift
Reverse Bouncing Ball Delay
Reverse Bouncing Ball Delay with Tone Shift
Chimes delay
Delay with High Pass Filter
Delay with Low Pass filter
Delay with Pitch Change
Delay with Stereo Flip
Delay with Tone Shift
Distortion Effects
Harmonic Enhancer
Tape Saturation Limiter
Dynamics Processing
Broadcast Limiter II
Broadcast Limiter III
Hyperexp
LevelSpeech
Limiter
Limiter (2)
Noise Gate
Pop Mute
Text Envelope
Filters
Band Stop Filter
Chebyshev Type I Filter
Classic EQ
Comb Filter
Customizable EQ
Desk EQ
High Pass Filter with q
High Pass Filter (LFO)
Hum Remover
Low Pass Filter (LFO)
Low Pass Filter with Q
Multiband EQ
Mutron
Notch Filter
Parametric EQ
Random Low Pass Filter
Resonant Filter
Shelf Filter
Ten Band EQ
Modulation Effects
Dual Tape Decks
Flanger (linear)
Isochronic modulator
Random Amplitude Modulation
Random Pitch Modulation
Ring modulator
Variable Tremolo
Sequencer Effects
Audio Selection Sequencer 2
Time, Pitch and Tempo
Change Speed by Semitones
Extract Audio
Insert Silence
Regular interval audio splitter
Sliding Speed Change
Tempo Change
Time Shifter
Trim / Extend
Trim Silence
Turntable Warping MS
Analyze plug-in downloads
These plug-ins usually appear towards the bottom of the Analyze menu in Audacity.
All plug-ins
ACX Check
Peak Finder rft
Pitch Detect
Regular Interval Labels
